|
|
 |
Blow Off Valve |
 |
HKS SUPER SQV (sequential blow off
valve) adopted individual sequential
valve structure, actualized the pressure
control of the operating space where the
high supercharging limits are wide low
from the supercharging limits with the
differential pressure type control
system, delicately.
|
 |
|
 |
* Nipple for return usually set
(general-purpose
itself set is excluded)
*It corresponds to
RoHS |
 |
|
|
Trade name |
Cord/code No. |
Price in JYEN
|
Remark |
| SUPER SQV
general-purpose kit |
71004-AK001 |
¥26,500 |
|
| SUPER SQV car
classification kit |
Car classification list
reference |
|
|
Super SQV Racing |
 |
It
designated super SQV, as simpler
structure, made the high tuning
corresponding model “super SQV racing”
appears. |
|
It starts shaving and the operation
whose precision is high becomes possible
to the high supercharging territory the
single valve (super SQV racing private
equipment) depending upon adoption. -
Nipple for the suction return of φ19 and
φ29 standard equipment.
|
Type
|
Cord/code No.
|
Price
in JYEN
|
|
Super SQV racing
|
71004-AK002
|
39,500
|
|
 |
|
|
Super SQV Parts |
SF120-G (color: The gold) with the same
form as the fin of standard adoption &
the same sound quality, it makes the
high frequency sound echo which has the
existence impression low from
supercharging in all to high
supercharging.
SF100-P (color: The purple metallic) we make the sequential
sound emphasize which echoes in 2 stages
to a greater extent, the fin of standard
adoption flat volume of the high
frequency limits which differ was held
down the sound quality is feature. |
 |
 |
| SF120-G (substance
selling separately) |
SF100-P (substance
selling separately) |
|
|
Item name |
Color |
Cord/code
No. |
Price in
JYEN |
| SF120-G |
Gold |
1422-SA002 |
1,900 |
| SF100-P |
Purple
metallic |
1422-SA001 |
1,900 |
|
 |
|
|
|
Super SQV return nipple
It has belonged to the super SQV car
classification kit and super SQV racing,
it is the nipple for return piping.
Merit
Removing the substance cover, you
install by the fact that it replaces
with the fin, it becomes possible to do
the return piping to the suction pipe,
making use of the hose of φ19 or φ29.
|
 |
|
|
Trade name |
Cord/code
No. |
Price
in JYEN |
| SQV return
nipple φ19 |
71002-AK003 |
2,500 |
| SQV return
nipple φ29 |
71002-AK004 |
2,500 |
|
| Unlike the car
classification kit, it is the
kit of super SQV itself. In the
vehicle the case of
installation, because the part
which is necessary for other
than this kit (the flange & the
pipe & the hoses) there are
times when it is, in regard to
verification, please buy. |
 |
|
|
|
Super
SQV itself kit |
Super
SQV general-purpose pipe |
|
|
Item name |
Cord/code No. |
Price in JYEN |
|
Super SQV itself kit |
71004-AK001 |
26,500 |
|
|
Type |
Cord/code No. |
Price in JYEN |
Remark |
| φ50
L=150 |
1404-SA004 |
8,500 |
 |
|
|
| Super SQV part |
|
Item name |
Cord/code No. |
Price in JYEN |
| Super SQV
exchange filter |
1410-SA008 |
1,200 |
| O ring |
91731-065100 |
800 |
| C ring |
91711-009100 |
800 |
|
| SQV general-purpose
flange |
|
|
Type |
Cord/code
No. |
Price in
JYEN |
Remark |
|
The NISSAN RB flange type |
71002-AK005 |
8,000 |
|
|
φ19 straight |
71002-AK006 |
8,000 |
|
|
φ19−90° |
71002-AK007 |
8,000 |
|
|
φ35−40° |
71002-AK008 |
8,000 |
|
|
φ29 straight |
71002-AK009 |
8,000 |
|
|
φ30−90 |
71002-AK010 |
8,000 |
|
|
For iron φ50 pipe correspondence
welding |
71002-AK011 |
2,500 |
 |
|
For iron φ65 pipe correspondence
welding |
71002-AK012 |
2,500 |
 |
|
For aluminum φ60 pipe
correspondence welding |
71002-AK013 |
2,500 |
 |
|
|
Note: The flange (general purpose)
welding drill processing and the like is
necessary. |
|
|
 |
 |
 |
CT9A RX6R setup kit
* Setup
kit conformity model : CN9A/CP9A/CT9A
* Full kit Conformity model : CT9A
Setup kit : JYEN
598,500
Full kit :
JYEN 630,000
Output 350PS ~ 650PS
Torque 52kgm ~ 68kgm |
 |
|
|
 |
J 2025 RX6R setup kit
* Conformity model : GDB
Setup kit :
JYEN 546,000
Output 400PS ~ 520PS
Torque 50kgm ~ 65kgm |
 |
|
|
|
 |
IMPREZA BOLT
ON TURBO KIT |
| Item Name |
Price in JYEN |
|
PE1818F
|
239,400
|
|
PE1820F
|
239,400 |
|
Disassembly
type actuator |
249,900 |
|
| The volt/bolt on turbo for in
presser the genuine turbine enlarges the compressor
in the base, and adopts the ball bearing system
center section in addition the exhaust housing can
select A/R18 and A/R20. |
|
 |
TURBINE CHARGER KIT |
 |
| Model |
Honda Fit GD3 |
|
Year Model |
'02.09 -
'07.09 |
|
Engine type |
L15A |
|
Price |
STAGE 1 : JYEN
315,000 |
|
STAGE 2 : JYEN
420,000 |
|
STEP UP KIT :
JYEN 126,000 |
|
|
 |
 |
| Item Name |
Qty |
price in JYEN |
Divided system
Actuator |
1 |
18,900 |
|
| Spring |
Spring
constant |
Valve
(Kg/㎠) |
Price in JYEN |
| #3 |
0.18 |
0.3 |
2,100 |
| #4 |
0.4 |
0.5 |
| #5 |
0.5 |
0.8 |
| #6 |
0.55 |
1.0 |
|
|
 |
RX6R Flange |
| Item Name |
Qty |
price in JYEN |
| Flange RX6R EX IN |
1 |
4,200 |
| Flange RX6R EX OUT |
1 |
4,200 |
| Flange RX6R OIL OUT |
1 |
1,575 |
|
The flange is necessary for the RX6R
turbo installation.
Using this flange, it can install the RX6R turbo in
unrestricted position. |
|
 |
RX6R Gasket |
| Item Name |
Qty |
price in JYEN |
| Gasket RX6R EX IN |
1 |
2,940 |
| Gasket RX6R EX OUT |
1 |
2,940 |
| Gasket RX6R OIL OUT |
1 |
840 |
|
The gasket is necessary for the RX6R
turbo installation..
Because IN for RX6R, the OUT gasket has adopted the
metal gasket, durability is preeminent. |
|
 |
Wastegate Adaptor |
| Item Name |
Qty |
price in JYEN |
| Flange for waist gate |
2 |
8,400 |
| V band for waist gate |
1 |
6,300 |
|
| V band and the flange are optimum to
the installation of the waist gate. |
|
 |
Wastegate Spring |
| Item Name |
Gate Opening
(Kg/㎠) |
Qty |
price in JYEN |
| waist gate
Spring |
0.4 |
1 |
4,935 |
| 0.6 |
1 |
| 0.8 |
1 |
| 1.0 |
1 |
|
| The spring of 4 types is prepared,
fine pressure control with setting boost is
actualized. |
|
|
|
|
|
